M DCPL_XOSC C X2 1 2 P2 3V3A RESET 40MHz NC VCC GND OUT 4 C322 DNM 2 4 6 8 10 12 14 16 18 20 MOSI SCLK 3 R141 TG-5021CG 1 3 5 7 9 11 13 15 17 19 11 2 R12 56k 0 14 32 30 X1 40MHz 1 7 8 31 C231 3 23 24 GPIO3 1.5nF C302 DNM_0402 C301 15pF 2 4 19 20 C311 15pF SFM-110-02-S-D-A-K-TR CS_N RESET_N DVDD DVDD VDD_GUARD AVDD_IF AVDD_RF AVDD_PFD_CHP AVDD_XOSC AVDD_SYNTH1 AVDD_SYNTH2 SI SCLK RBIAS EXT_OSC XOSC_Q1 DCPL DCPL_VCO DCPL_PFD_CHP DCPL_XOSC XOSC_X2 GPIO0 SO(GPIO1) GPIO2 GPIO3 LPF0 LPF1 LNA_P LNA_N TRX_SW PA 33 P1 B L191 15nH 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 EGP NC 12 5 1 13 15 25 28 22 27 C271 C221 C281 C251 C151 C131 C11 C51 C121 47nF 47nF 47nF 47nF 47nF 47nF 47nF 47nF 47nF 6 21 26 29 DCPL_XOSC 10 9 4 3 GPIO0 MISO GPIO2 GPIO3 VDD_REG C291 C261 C211 47nF 47nF 10nF C61 R171 10 220nF L192 12nH C191 3.3pF C173 33pF C171 10nF C177 DNM_0402 17 C174 15pF 16 Default mount 2-3 L172 7.5nH L173 18nH C201 3.3pF Ant1 DNM_0402 R181 2 CC120xRHB L201 12nH C172 100pF L171 10nH 18 C176 1pF GPIO0 GPI
Value Tol. Package Manufacturer Details Distributor Part No. Capacitors C1 100uF C1210 C2 3,3pF C0402 C3 n.m. C0402 C4 n.m. C0402 470 R0402 SW1 B3U-1000P B3U-1000P Omron SW2 B3U-1000P B3U-1000P Omron MODUL1 A45201101 CON1 10X2_SAMTEC_F Samtec 10x2, female SFM-110-02-S-D-AK CON2 10X2_SAMTEC_F Samtec 10x2, female SFM-110-02-S-D-AK CON3 22-03-5035 1x3, 2.5mm Molex male 22-03-5035 CON4 n.m. 2x9, 2.54mm CON5 BL31-006U 1x6, 1.27mm MPE LED1 APT1608SRCPRV 0603 Kingbright red ANT1 0433AT62A0020 Johanson 433MHz, SMD Resistors R1 Miscellaneous M66210110 M66210110 AMBER wireless AMB4520-1, ungepruft Pinhead MPE BL31-006U Johanson 0433AT62A0020 PCB 30 MSP-EXPCC430RFx Experimenter Kit User's Guide Copyright (c) 2013, Texas Instruments Incorporated SLAU460 - January 2013 Submit Documentation Feedback EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under the following conditions: The user assumes all responsibility and
805 10 uF, 15% C_10U_0805_X5R_L_25 C441 Capacitor 0402 68 pF, 5% C_68P_0402_NP0_J_50 L61 Inductor 0402 7.5 nH, 5% L_7N5_0402_J L62 Inductor 0402 5.6 nH, 5% L_5N6_0402_J L81 Inductor 0402 7.5 nH, 5% L_7N5_0402_J P1 SMD pinrow socket SMD_SOCKET_2x10 (Samtec SFM-110-02-S-D-A-K-TR) P2 SMD pinrow socket SMD_SOCKET_2x10 (Samtec SFM-110-02-S-D-A-K-TR) P3 3 pin jumper 3 pin connector, 0.9 mm pin P4 Surface-mount SMA, straight SMA_SMD R1 Resistor 0603 0 R_0_0603 R2 Resistor 0603 0 R_0_0603 R421 Resistor 0402 2 , 1% R2R0_0402_F R451 Resistor 0402 43 k, 1% R_43K_0402_F U1 Single-chip transceiver CC2420 X1 Crystal, ceramic SMD 4x25mm X_16.000/10/10/10/16 (Toyocom TSX-10A 16M 16pF) SWRU045 Page 9 of 32 Note: The crystal X1 mounted on the EM board is a 16.000 MHz crystal, with 10 ppm initial tolerance, 10 ppm drift over temperature and a temperature range of -10 C to +60 C. The crystal is designed for 16 pF load capacitance. In an actual application, the tolerance, drift and temperature range of t
F C311 15pF DCPL DCPL_VCO DCPL_PFD_CHP DCPL_XOSC XOSC_X2 C231 3 GPIO3 C302 DNM_0402 SI SCLK 30 X1 40MHz 1 7 8 DVDD DVDD VDD_GUARD AVDD_IF AVDD_RF AVDD_PFD_CHP AVDD_XOSC AVDD_SYNTH1 AVDD_SYNTH2 GPIO0 SO(GPIO1) GPIO2 GPIO3 LPF0 LPF1 19 20 LNA_P LNA_N TRX_SW SFM-110-02-S-D-A-K-TR PA 33 P1 B 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 L191 56nH EGP NC 12 5 1 13 15 25 28 22 27 C271 C221 C281 C251 C151 C131 C11 C51 47nF 47nF 47nF 47nF 47nF 47nF 47nF 47nF 6 21 26 29 DCPL_XOSC 10 9 4 3 GPIO0 MISO GPIO2 GPIO3 VDD_REG C291 C261 C211 47nF 47nF 10nF C61 R171 18 220nF C173 56pF L192 27nH C191 5.1pF C201 5.1pF C174 39pF 16 Default mount 2-3 L172 15nH L173 43nH R181 2 C175 6.2pF L174 22nH Ant1 DNM_0402 1 B 0 Ant2 0.9pF 3 Ant3 56nH C181 5.1pF A1 1 ANTENNA 1 L193 15nH SFM-110-02-S-D-A-K-TR 2 5 3 4 P3 SMA-10V21-TGG P4 1 2 3 4 5 6 7 8 A C172 100pF C177 DNM_0402 17 CC120xRHB L201 27nH C171 10nF L171 56nH 18 C176 2.2pF GPIO0 GPIO2 CSN SCLK MOSI MISO C121 47nF GND GPIO0 GPIO2 CSN SCLK MOSI MISO VDD
apacitor 0402 68 pF, 5% C_68P_0402_NP0_J_50 L61 Inductor 0402 7.5 nH, 5% L_7N5_0402_J L62 Inductor 0402 5.6 nH, 5% L_5N6_0402_J L71 Inductor 0402 27 nH, 5% L_27N_0402_J L81 Inductor 0402 7.5 nH, 5% L_7N5_0402_J P1 SMD pinrow socket SMD_SOCKET_2x10 (Samtec SFM-110-02-S-D-A-K-TR) P2 SMD pinrow socket SMD_SOCKET_2x10 (Samtec SFM-110-02-S-D-A-K-TR) P4 Surface-mount SMA, straight SMA_SMD R1 Resistor 0402 2.2 , 5% R2R2_0402_J R451 Resistor 0402 43 k, 1% R_43K_0402_F U1 Single-chip transceiver CC2400 X1 Crystal, ceramic SMD 4x25mm X_16.000/10/10/10/16 (Toyocom TSX-10A 16M 16pF) Note: The crystal X1 mounted on the EM board is a 16.000 MHz crystal, with 10 ppm initial tolerance, 10 ppm drift over temperature and a temperature range of -10 C to +60 C. The crystal is designed for 16 pF load capacitance. In an actual application, the tolerance, drift and temperature range of the crystal must be considered with application requirements in mind. Please consult the data sheet and SmartRF(R) Studio
805 10 uF, 15% C_10U_0805_X5R_L_25 C441 Capacitor 0402 68 pF, 5% C_68P_0402_NP0_J_50 L61 Inductor 0402 7.5 nH, 5% L_7N5_0402_J L62 Inductor 0402 5.6 nH, 5% L_5N6_0402_J L81 Inductor 0402 7.5 nH, 5% L_7N5_0402_J P1 SMD pinrow socket SMD_SOCKET_2x10 (Samtec SFM-110-02-S-D-A-K-TR) P2 SMD pinrow socket SMD_SOCKET_2x10 (Samtec SFM-110-02-S-D-A-K-TR) P3 3 pin jumper 3 pin connector, 0.9 mm pin P4 Surface-mount SMA, straight SMA_SMD R1 Resistor 0603 0 R_0_0603 R2 Resistor 0603 0 R_0_0603 R421 Resistor 0402 2 , 1% R2R0_0402_F R451 Resistor 0402 43 k, 1% R_43K_0402_F U1 Single-chip transceiver CC2420 X1 Crystal, ceramic SMD 4x25mm X_16.000/10/10/10/16 (Toyocom TSX-10A 16M 16pF) Chipcon AS SmartRF CC2420DK Development Kit User Manual (rev. 1.0) 2003-11-19 Page 9 of 33 Note: The crystal X1 mounted on the EM board is a 16.000 MHz crystal, with 10 ppm initial tolerance, 10 ppm drift over temperature and a temperature range of -10 C to +60 C. The crystal is designed for 16 pF load capacitance. In
SFM-110-02-S-D-A SFM-125-L2-S-D Surface SMT Mount T/H .050" x .050" SOCKETS SFM SERIES Page 102 Available with optional pick-and-place pads APPLICATIONS Lower cost Phosphor Bronze contact for applications where L * I * T * E Beryllium Copper is not needed. (1,27) .050 TYP (1,588) .0625 TYP LEAD STYLE PLATING OPTION 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 = SFM Series (Call Samtec for other sizes) See SFMC Series for more sizes = Low Insertion Force Tiger Eye Contact A S -A (1,27) .050 (1,59) .063 -A OPTION = Tiger Eye LITE Contact (1,27) .050 x No. of Positions + (3,94) .155 except for alignment pin option: (1,27) .050 x No. of Positions + (3,17) .125 (1,27) .050 DIA (1,65) .065 (3,05) .120 (1,27) .050 TYP (1,27) .050 X No. of Positions + (1,91) .075 (4,57) .180 (1,41 x 0,25) .056 x .010 -LC OPTION (1,27) .050 (2,79) .110 (6,35) .250 SO = Alignment Pin (Metal or plastic at Samtec discretion) (N/A with -LC) = 30" (0,76m) Gold contact 150" (3,81m) Tin tail -L2 (3,68) .145 -LC Option: (1,19mm + 0,08m
SFM-110-02-S-D-A SFM-125-L2-S-D Surface SMT Mount T/H .050" x .050" SOCKETS SFM SERIES Page 134 Available with optional pick-and-place pads Single row available. Call Samtec. APPLICATIONS Lower cost Phosphor Bronze contact for applications where L * I * T * E Beryllium Copper is not needed. (1,27) .050 TYP (1,588) .0625 TYP LEAD STYLE PLATING OPTION 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 = SFM Series (Call Samtec for other sizes) See SFMC Series for more sizes -L2 = Low Insertion Force Tiger Eye Contact A S -A = Alignment Pin (N/A with -LC) -LC (1,27) .050 (1,59) .063 -A OPTION = Tiger Eye LITE Contact (1,27) .050 x No. of Positions + (3,94) .155 except for alignment pin option: (1,27) .050 x No. of Positions + (3,17) .125 (1,27) .050 DIA = Locking Clip (N/A with -A) -K = (4,00mm) .157" DIA Polyimide film Pick & Place Pad -P (1,65) .065 (3,05) .120 (1,27) .050 TYP (1,27) .050 X No. of Positions + (1,91) .075 (4,57) .180 (1,41 x 0,25) .056 x .010 -LC OPTION (1,27) .050 (2,79) .110 (6,35) .250 SO O
SFM-110-02-S-D-A SFM-125-L2-S-D Surface SMT Mount T/H .050" x .050" SOCKETS SFM SERIES Page 106 Available with optional pick-and-place pads APPLICATIONS Lower cost Phosphor Bronze contact for applications where L * I * T * E Beryllium Copper is not needed. NO. PINS PER ROW 1 LEAD STYLE PLATING OPTION -02 = SFM Series (Call Samtec for other sizes) See SFMC Series for more sizes Note: Some sizes, styles and options are non-standard, non-returnable. Processing: -A Option: (1,35mm + 0,08mm - 0,00mm) DIA (2) .053" + .003" - .000" DIA (2) (0,74) .029 TYP (1,27) .050 TYP (1,588) .0625 TYP = Low Insertion Force Tiger Eye Contact (1,27) .050 (1,59) .063 -A OPTION = Tiger Eye LITE Contact (1,27) .050 x No. of Positions + (3,94) .155 except for alignment pin option: (1,27) .050 x No. of Positions + (3,17) .125 (1,27) .050 DIA (1,65) .065 (3,05) .120 (1,27) .050 X No. of Positions + (1,91) .075 (1,27) .050 TYP (4,57) .180 (0,51) .020 (1,41 x 0,25) .056 x .010 -LC OPTION (1,27) .050 (2,79) .110 (6,35) .250 S
SFM-110-02-S-D-A SFM-125-L2-S-D Surface SMT Mount T/H .050" x .050" SOCKETS SFM SERIES Page 94 Available with optional pick-and-place pads APPLICATIONS Lower cost Phosphor Bronze contact for applications where L * I * T * E Beryllium Copper is not needed. NO. PINS PER ROW 1 LEAD STYLE PLATING OPTION -02 = SFM Series (Call Samtec for other sizes) See SFMC Series for more sizes Note: Some sizes, styles and options are non-standard, non-returnable. Processing: -A Option: (1,35mm + 0,08mm - 0,00mm) DIA (2) .053" + .003" - .000" DIA (2) (0,74) .029 TYP (1,27) .050 TYP (1,588) .0625 TYP = Low Insertion Force Tiger Eye Contact (1,27) .050 (1,59) .063 -A OPTION = Tiger Eye LITE Contact (1,27) .050 x No. of Positions + (3,94) .155 except for alignment pin option: (1,27) .050 x No. of Positions + (3,17) .125 (1,27) .050 DIA (1,65) .065 (3,05) .120 (1,27) .050 X No. of Positions + (1,91) .075 (1,27) .050 TYP (4,57) .180 (0,51) .020 (1,41 x 0,25) .056 x .010 -LC OPTION (1,27) .050 (2,79) .110 (6,35) .250 S -
SFM-110-02-S-D-A SFM-125-L2-S-D Surface SMT Mount T/H .050" x .050" SOCKETS SFM SERIES Page 90 Available with optional pick-and-place pads APPLICATIONS Lower cost Phosphor Bronze contact for applications where L * I * T * E Beryllium Copper is not needed. NO. PINS PER ROW 1 LEAD STYLE PLATING OPTION -02 = SFM Series (Call Samtec for other sizes) See SFMC Series for more sizes Note: Some sizes, styles and options are non-standard, non-returnable. Processing: -A Option: (1,35mm + 0,08mm - 0,00mm) DIA (2) .053" + .003" - .000" DIA (2) (0,74) .029 TYP (1,27) .050 TYP (1,588) .0625 TYP = Low Insertion Force Tiger Eye Contact (1,27) .050 (1,59) .063 -A OPTION = Tiger Eye LITE Contact (1,27) .050 x No. of Positions + (3,94) .155 except for alignment pin option: (1,27) .050 x No. of Positions + (3,17) .125 (1,27) .050 DIA (1,65) .065 (3,05) .120 (1,27) .050 X No. of Positions + (1,91) .075 (1,27) .050 TYP (4,57) .180 (0,51) .020 (1,41 x 0,25) .056 x .010 -LC OPTION (1,27) .050 (2,79) .110 (6,35) .250 S -
lease contact Samtec or go to www.samtec.com?SFM for recommended PCB layout. =A Option: (135mm + 0,08 + O,00mm) DLA (2) A053" + 003" - 00" DIA (2) e, 0.51 4 eat aC LC Option: (1.19mm + 0,08 - 0,00mm) DIA (2) _~ D4?" 003" 2.000 DUA (2) 050" x .050" SOCKETS SFM-110-02-S-D-A SFM-125-L2-S-D SFM SERIES (1,27mm x 1,27mm) -050" x .050" micro pitch Mates with: TFM, FTS (LIF), FW (LIF), FTSH (LIF) High reliability APPLICATION SPECIFIC OPTION Single row available. Call Samtec. Available with optional pick-and-place pads APPLICATIONS Lower cost Phosphor Bronze contact for applications where Beryllium Copper is a not needed. Slotted SMT tails . . . ai"G gs Choice of alignment pin eo o, . or locking clip options &, Note: Some sizes, styles and ig GP ap! - 4 options are non-standard, a non-returnable. S; eo NO. PINS LEAD PLATING = rela itelN tt-M =e) daa el le 84a es EN eet) aed a) (N/A with -LC) a ae = Locking Clip mal = Tiger Eye lereTilt-leig -L2 a mel = 30p" (0,76ym) Gold contact, atte 05, 10, 15, 20, 25,
SFM-110-02-S-D-A SFM-125-L2-S-D Surface SMT Mount T/H .050" x .050" SOCKETS SFM SERIES Page 102 Single row available. Call Samtec. APPLICATIONS Lower cost Phosphor Bronze contact for applications where L * I * T * E Beryllium Copper is not needed. (1,27) .050 TYP (1,588) .0625 TYP NO. PINS PER ROW 1 LEAD STYLE PLATING OPTION 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 = SFM Series (Call Samtec for other sizes) See SFMC Series for more sizes = Low Insertion Force Tiger Eye Contact A S -A (1,27) .050 (1,59) .063 -A OPTION = Tiger Eye LITE Contact (1,27) .050 x No. of Positions + (3,94) .155 except for alignment pin option: (1,27) .050 x No. of Positions + (3,17) .125 (1,27) .050 DIA (1,65) .065 (3,05) .120 (1,27) .050 TYP (1,27) .050 X No. of Positions + (1,91) .075 (4,57) .180 (1,41 x 0,25) .056 x .010 -LC OPTION (1,27) .050 (2,79) .110 (6,35) .250 SO = Alignment Pin (Metal or plastic at Samtec discretion) (N/A with -LC) = 30" (0,76m) Gold contact 150" (3,81m) Tin tail -L2 (3,68) .145 -LC Option: (1,19