30 IFRM TC = 130 C (per leg) 30 VRRM IFSM tp = 5 s sine VF 30 Apk, TJ = 125 C TJ Range UNITS A 35/45 V 1060 A 0.73 V -65 to 150 C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-MBRB2535CT-M3 VS-MBR2535CT-1-M3 VS-MBRB2545CT-M3 VS-MBR2545CT-1-M3 UNITS 35 45 V Revision: 03-Mar-14 Document Number: 94952 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MBRB25..CT-M3, VS-MBR25..CT-M3 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg Non-repetitive peak surge current TC = 130 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 C 5 s sine or 3 s rect. pulse VALUES UNITS 15 IF(A
frequency operation VF @ 30 Apk, TJ = 125C 0.73 V TJ range - 65 to 150 C IF(AV) Rectangular waveform (Per Device) IFRM @ TC = 130C (Per Leg) Guard ring for enhanced ruggedness and long term reliability Case Styles MBR2535CT MBR2545CT MBRB2535CT MBRB2545CT MBR2535CT-1 MBR2545CT-1 TO-220 D2PAK TO-262 www.irf.com 1 MBR2545CT, MBRB2545CT, MBR2545CT-1 PD-2.322 rev. B 06/99 Voltage Ratings Parameters VR MBR2535CT MBRB2535CT MBR2535CT-1 MBR2545CT MBRB2545CT MBR2545CT-1 35 45 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward (Per Leg) Current (Per Device) IFRM Peak Repetitive Forward Current (Per Leg) IFSM Non Repetitive Peak Surge Current Values Units 15 30 30 A @ T C = 130 C, (Rated VR) A Rated V R, square wave, 20kHz T C = 130 C 1060 A 150 IRRM Peak Repetitive Reverse Surge Current Conditions 5s Sine or 3s Following any rated load condition and with rated V RRM applied Rect. pulse Surge applied at rated l
at 125 C MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES IF(AV) Rectangular waveform (per device) 30 IFRM TC = 130 C (per leg) 30 VRRM UNITS A 35/45 V IFSM tp = 5 s sine 1060 A VF 30 Apk, TJ = 125 C 0.73 V TJ Range - 65 to 150 C MBRB2535CT MBR2535CT-1 MBRB2545CT MBR2545CT-1 UNITS 35 45 V VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg TEST CONDITIONS Non-repetitive peak surge current Non-repetitive avalanche energy per leg Repetitive avalanche current per leg Document Number: 93979 Revision: 21-Aug-08 15 IF(AV) TC = 130 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 C 5 s sine or 3 s rect. pulse IFSM VALUES UNITS 30 Following any rated load condition and with rated VRRM applied 30 1060 A Surge applied at rated load conditions halfwave, single phase, 60 Hz 150 EAS TJ = 25 C, IAS = 2 A,
frequency operation VF @ 30 Apk, TJ = 125C 0.73 V TJ range - 65 to 150 C IF(AV) Rectangular waveform (Per Device) IFRM @ TC = 130C (Per Leg) Guard ring for enhanced ruggedness and long term reliability Case Styles MBR2535CT MBR2545CT MBRB2535CT MBRB2545CT MBR2535CT-1 MBR2545CT-1 TO-220 D2PAK TO-262 www.irf.com 1 MBR2545CT, MBRB2545CT, MBR2545CT-1 PD-2.322 rev. B 06/99 Voltage Ratings Parameters VR MBR2535CT MBRB2535CT MBR2535CT-1 MBR2545CT MBRB2545CT MBR2545CT-1 35 45 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward (Per Leg) Current (Per Device) IFRM Peak Repetitive Forward Current (Per Leg) IFSM Non Repetitive Peak Surge Current Values Units 15 30 30 A @ T C = 130 C, (Rated VR) A Rated V R, square wave, 20kHz T C = 130 C 1060 A 150 IRRM Peak Repetitive Reverse Surge Current Conditions 5s Sine or 3s Following any rated load condition and with rated V RRM applied Rect. pulse Surge applied at rated l
at 125 C MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES IF(AV) Rectangular waveform (per device) 30 IFRM TC = 130 C (per leg) 30 VRRM UNITS A 35/45 V IFSM tp = 5 s sine 1060 A VF 30 Apk, TJ = 125 C 0.73 V TJ Range - 65 to 150 C MBRB2535CT MBR2535CT-1 MBRB2545CT MBR2545CT-1 UNITS 35 45 V VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg TEST CONDITIONS Non-repetitive peak surge current Non-repetitive avalanche energy per leg Repetitive avalanche current per leg Document Number: 93979 Revision: 21-Aug-08 15 IF(AV) TC = 130 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 C 5 s sine or 3 s rect. pulse IFSM VALUES UNITS 30 Following any rated load condition and with rated VRRM applied 30 1060 A Surge applied at rated load conditions halfwave, single phase, 60 Hz 150 EAS TJ = 25 C, IAS = 2 A,
30 IFRM TC = 130 C (per leg) 30 VRRM IFSM tp = 5 s sine VF 30 Apk, TJ = 125 C TJ Range UNITS A 35/45 V 1060 A 0.73 V - 65 to 150 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM VS-MBRB2535CTPbF VS-MBR2535CT-1PbF VS-MBRB2545CTPbF VS-MBR2545CT-1PbF UNITS 35 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg Non-repetitive peak surge current TEST CONDITIONS TC = 130 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 C IFSM UNITS 15 IF(AV) 5 s sine or 3 s rect. pulse VALUES 30 Following any rated load condition and with rated VRRM applied 30 1060 Surge applied at rated load conditions halfwave, single phase, 60 Hz 150 A Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 2 A, L = 8 mH 16 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 2 A Document Numbe
1 1 0 0 ME 0 0 0 0 ME 1 1 0 0 CH 0 0 0 0 CH 1 1 0 0 ME 0 0 0 0 ME 1 1 0 0 ME 0 0 0 0 ME 0 0 0 0 ME 1 1 0 0 ME 0 0 0 0 ME 0 0 0 0 ME Contact:Philix He Shenzhen Crenov Technology Co.,Ltd MBR2535CTPBF Discrete Schottky TO220 MBR2535CT Discrete Schottky TO220 MBR2535CT-1PBFDiscrete Schottky D2PAK MBR2535CT-1 Discrete Schottky D2PAK MBR2545CTPBF Discrete Schottky TO220 MBR2545CT Discrete Schottky TO220 MBR2545CT-1PBFDiscrete Schottky D2PAK MBR2545CT-1 Discrete Schottky D2PAK MBR3035WTPBF Discrete Schottky TO247 MBR3035WT Discrete Schottky TO247 MBR3045CTPBF Discrete Schottky TO220 MBR3045CT Discrete Schottky TO220 MBR3045CT-1PBFDiscrete Schottky D2PAK MBR3045CT-1 Discrete Schottky D2PAK MBR3045WTPBF Discrete Schottky TO247 MBR3045WT Discrete Schottky TO247 MBR340 Discrete Schottky AXIALS< MBR340TR Discrete Schottky AXIALS< MBR350 Discrete Schottky AXIALS< MBR350TR Discrete Schottky AXIALS< MBR360 Discrete Schottky AXIALS< http://www.crenov.com 35V 30A Schottky Common Cathode Diode in a TO
Cathode D2PAK 2 3 Anode 1 Anode 2 Common Cathode 3 Anode TO-262 1 MBR25..CT, MBRB25..CT, MBR25..CT-1 Bulletin PD-2.322 rev. E 01/07 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) V RWM Max. Working Peak Reverse Voltage (V) MBR2535CT MBRB2535CT MBR2535CT-1 MBR2545CT MBRB2545CT MBR2545CT-1 35 45 Absolute Maximum Ratings Parameters Values Units 15 30 30 A @ TC = 130 C, (Rated VR) A Rated V R, square wave, 20kHz T C = 130 C IF(AV) Max. Average Forward (Per Leg) Current (Per Device) IFRM Peak Repetitive Forward Current (Per Leg) IFSM Non Repetitive Peak Surge Current 1060 A 150 EAS Non-Repetitive Avalanche Energy IAR Repetitive Avalanche Current (Per Leg) 16 mJ 2 A Values Units Conditions 5s Sine or 3s Following any rated load condition and with rated V RRM applied Rect. pulse Surge applied at rated load conditions halfwave, single phase, 60Hz (Per Leg) T J = 25 C, IAS = 2 Amps, L = 8 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrica
30 IFRM TC = 130 C (per leg) 30 VRRM IFSM tp = 5 s sine VF 30 Apk, TJ = 125 C TJ Range UNITS A 35/45 V 1060 A 0.73 V - 65 to 150 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM VS-MBRB2535CTPbF VS-MBR2535CT-1PbF VS-MBRB2545CTPbF VS-MBR2545CT-1PbF UNITS 35 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg Non-repetitive peak surge current TEST CONDITIONS TC = 130 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 C IFSM UNITS 15 IF(AV) 5 s sine or 3 s rect. pulse VALUES 30 Following any rated load condition and with rated VRRM applied 30 1060 Surge applied at rated load conditions halfwave, single phase, 60 Hz 150 A Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 2 A, L = 8 mH 16 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 2 A Document Numbe
RF2535CT-E3/45 MBRF2535CTHE3/45 MBRF2545CT-E3/45 MBRF2545CTHE3/45 MBRF2550CT-E3/45 MBRF2550CTHE3/45 MBRF2560CT-E3/45 MBRF2560CTHE3/45 MBRB2535CTTRL MBRB2535CTTRR MBRB2545CTTRL MBRB2545CTTRR MBR2545CT-E3/4W MBRB2545CTHE3-/81 VSMBR2535CTPBF VS-MBRB2535CTPBF MBR2535CT-1 MBR2545CT-1
T-1PbF Base Common Cathode Base Common Cathode 2 1 Anode 2 Common Cathode D2PAK www.irf.com 2 3 Anode 1 Anode 2 Common Cathode 3 Anode TO-262 1 MBRB25..CTPbF, MBR25..CT-1PbF Series Bulletin PD-21045 rev. A 07/06 Voltage Ratings Parameters VR MBRB2535CTPbF MBR2535CT-1PbF MBRB2545CTPbF MBR2545CT-1PbF 35 45 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward (Per Leg) Current (Per Device) IFRM Peak Repetitive Forward Current (Per Leg) IFSM Non Repetitive Peak Surge Current Values Units 15 30 30 A @ TC = 130 C, (Rated VR) A Rated VR, square wave, 20kHz TC = 130 C 1060 A 150 EAS Non-Repetitive Avalanche Energy 16 mJ IAR Repetitive Avalanche Current 2 A (Per Leg) Conditions 5s Sine or 3s Following any rated load condition and with rated V RRM applied Rect. pulse Surge applied at rated load conditions halfwave, single phase, 60Hz (Per Leg) TJ = 25 C, IAS = 2 Amps, L = 8 mH Current decaying linearly to zero in 1 sec Freque
25 C MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES IF(AV) Rectangular waveform (per device) 30 IFRM TC = 130 C (per leg) 30 VRRM IFSM tp = 5 s sine VF 30 Apk, TJ = 125 C TJ Range UNITS A 35/45 V 1060 A 0.73 V - 65 to 150 C MBRB2535CTPbF, MBR2535CT-1PbF MBRB2545CTPbF, MBR2545CT-1PbF UNITS 35 45 V VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg TEST CONDITIONS Non-repetitive peak surge current Non-repetitive avalanche energy per leg Repetitive avalanche current per leg 15 IF(AV) TC = 130 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 C 5 s sine or 3 s rect. pulse IFSM VALUES UNITS 30 Following any rated load condition and with rated VRRM applied 30 1060 A Surge applied at rated load conditions halfwave, single phase, 60 Hz 150 EAS TJ = 25 C, IAS = 2 A, L = 8 mH 16 mJ IAR Current decay
sensitron.com * MBR2535/2545CT-G MBRB2535/2545CT-G MBR2535/2545CT-1-G SENSITRON SEMICONDUCTOR Green Products Technical Data Data Sheet 3487, Rev. A Maximum Ratings: Characteristics Peak Inverse Voltage Symbol VRWM Condition - Max. MBR2535CT-G MBRB2535CT-G MBR2535CT-1-G MBR2545CT-G MBRB2545CT-G MBR2545CT-1-G 15(per leg) 35 45 Max. Average Forward Current Peak Repetitive Forward Current (per leg) Max. Peak One Cycle NonRepetitive Surge Current Peak Repetitive Reverse Surge Current IF(AV) IFRM 50% duty cycle @TC = 130C, rectangular wave form Rated VR,square wave, 20kHz,TC=130C IFSM IRRM Units V A 30(per device) 20 A 8.3 ms, half Sine pulse 150 A 2.0sec 1.0KHz 1.0 A Electrical Characteristics: Characteristics Max. Forward Voltage Drop (per leg) * Max. Reverse Current (per leg) * Symbol VF1 VF2 IR1 IR2 Max. Junction Capacitance (per leg) Typical Series Inductance (per leg) Max. Voltage Rate of Change * CT LS dv/dt Condition @ 30A, Pulse, TJ = 25 C Max. 0.82 Units V @ 10A, Pulse, TJ = 125 C @VR = rated
30 IFRM TC = 130 C (per leg) 30 VRRM IFSM tp = 5 s sine VF 30 Apk, TJ = 125 C TJ Range UNITS A 35/45 V 1060 A 0.73 V - 65 to 150 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM VS-MBRB2535CTPbF VS-MBR2535CT-1PbF VS-MBRB2545CTPbF VS-MBR2545CT-1PbF UNITS 35 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg Non-repetitive peak surge current TEST CONDITIONS TC = 130 C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 C IFSM UNITS 15 IF(AV) 5 s sine or 3 s rect. pulse VALUES 30 Following any rated load condition and with rated VRRM applied 30 1060 Surge applied at rated load conditions halfwave, single phase, 60 Hz 150 A Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 2 A, L = 8 mH 16 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 2 A Document Numbe
n Cathode D2PAK 2 3 Anode 1 Anode 2 Common Cathode 3 Anode TO-262 1 MBR2545CT, MBRB2545CT, MBR2545CT-1 Bulletin PD-2.322 rev. C 01/03 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) MBR2535CT MBRB2535CT MBR2535CT-1 MBR2545CT MBRB2545CT MBR2545CT-1 35 45 Absolute Maximum Ratings Parameters IF(AV) Max.AverageForward (PerLeg) Current (PerDevice) IFRM Peak Repetitive Forward Current (Per Leg) IFSM Non Repetitive Peak Surge Current Values Units 15 30 30 A @ TC = 130 C, (Rated VR) A Rated V R, square wave, 20kHz TC = 130 C 1060 A 150 EAS Non-Repetitive Avalanche Energy 16 mJ IAR Repetitive Avalanche Current (Per Leg) 2 A Values Units Conditions 5s Sine or 3s Following any rated load condition and with rated V RRM applied Rect. pulse Surge applied at rated load conditions halfwave, single phase, 60Hz (Per Leg) TJ = 25 C, IAS = 2 Amps, L = 8 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Spec