. mm Tape size 24.0 0.30 A max. 330.0 B min. 1.5 C 13.0 0.20 D min. 20.2 N min. 60 G 24.4 +2/-0 T max. 30.4 DocID11456 Rev 10 VN808CM-E 8 Ordering information Ordering information Table 15. Order code Order code Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and reel DocID11456 Rev 10 19/21 Revision history 9 VN808CM-E Revision history Table 16. Document revision history Date Revision 29-Jun-2005 1 Initial release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 09-Jul-2008 4 Added Section 6: Reverse polarity protection 04-Aug-2008 5 Added Figure 9: PowerSO-36 drawings 26-Aug-2009 6 Updated Section 6: Reverse polarity protection 15-Sep-2009 7 Typing mistake in cover page: Section : Features and Table 5: Input pin 24-Feb-2010 8 Updated Section 7: Package mechanical data 01-Aug-2013 9 Updated Section 7.1: Footprint recommended data. 10 Replaced LMAX parameter in Table 1 by EAS parameter. Added TJ condition to Table 3. Updated Section 6. 18-Dec-2013 20/

B min. 1.5 0.059 C 13.0 0.20 0.512 0.008 D min. 20.2 0.795 N min. 60 2.362 G 24.4 +2/-0 0.960 +0.079/-0 T max. 30.4 1.197 Doc ID 11456 Rev 8 VN808CM-E 8 Order codes Order codes Table 15. Order codes Order codes Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and reel Doc ID 11456 Rev 8 19/21 Revision history 9 VN808CM-E Revision history Table 16. 20/21 Document revision history Date Revision Changes 29-Jun-2005 1 Initial release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 09-Jul-2008 4 Added Section 6: Reverse polarity protection 04-Aug-2008 5 Added Figure 8: PowerSO-36 drawings 26-Aug-2009 6 Updated Section 6: Reverse polarity protection 15-Sep-2009 7 Typing mistake in cover page: Section : Features and Table 5: Input pin 24-Feb-2010 8 Updated Section 7: Package mechanical data Doc ID 11456 Rev 8 VN808CM-E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidi

e mold flash or protusions - Mold flash or protusions shall non exceed 0.15mm (0.006 inch) - Critical dimensions are "a3", "E" and "G". Figure 8. PowerSO-36 Scheme 11/14 VN808CM-E Table 11. 12/14 Order Codes Package Tube Tape and Reel PowerSO-36 VN808CM-E VN808CMTR-E VN808CM-E Table 12. Revision History Date Revision 12-Sep-2005 1 Changes Final release 13/14 VN808CM-E Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or sy

0.0433 0.031 10 0 8 0.0433 10 0 8 VN808CM-E Package mechanical data Figure 9. PowerSO-36 drawings Figure 10. PowerSO-36 footprint 15/18 Order codes 9 VN808CM-E Order codes Table 11. 16/18 Order codes Order codes Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and reel VN808CM-E 10 Revision history Revision history Table 12. Document revision history Date Revision Changes 29-Jun-2005 1 Final release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 09-Jul-2008 4 Added Section 7 on page 13 04-Aug-2008 5 Added: Figure 10: PowerSO-36 footprint on page 15 17/18 VN808CM-E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of s

7 0.0433 10 0 8 13/17 Package mechanical data 14/17 VN808CM-E Figure 8. PowerSO-36 drawings Figure 9. PowerSO-36 footprint Doc ID 11456 Rev 7 VN808CM-E 8 Order codes Order codes Table 11. Order codes Order codes Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and reel Doc ID 11456 Rev 7 15/17 Revision history 9 VN808CM-E Revision history Table 12. 16/17 Document revision history Date Revision Changes 29-Jun-2005 1 Initial release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 09-Jul-2008 4 Added Section 6: Reverse polarity protection 04-Aug-2008 5 Added Figure 9: PowerSO-36 footprint 26-Aug-2009 6 Updated Section 6: Reverse polarity protection 15-Sep-2009 7 Typing mistake in cover page: Section : Features and Table 5: Input pin Doc ID 11456 Rev 7 VN808CM-E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, correcti

. mm Tape size 24.0 0.30 A max. 330.0 B min. 1.5 C 13.0 0.20 D min. 20.2 N min. 60 G 24.4 +2/-0 T max. 30.4 DocID11456 Rev 10 VN808CM-E 8 Ordering information Ordering information Table 15. Order code Order code Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and reel DocID11456 Rev 10 19/21 Revision history 9 VN808CM-E Revision history Table 16. Document revision history Date Revision 29-Jun-2005 1 Initial release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 09-Jul-2008 4 Added Section 6: Reverse polarity protection 04-Aug-2008 5 Added Figure 9: PowerSO-36 drawings 26-Aug-2009 6 Updated Section 6: Reverse polarity protection 15-Sep-2009 7 Typing mistake in cover page: Section : Features and Table 5: Input pin 24-Feb-2010 8 Updated Section 7: Package mechanical data 01-Aug-2013 9 Updated Section 7.1: Footprint recommended data. 10 Replaced LMAX parameter in Table 1 by EAS parameter. Added TJ condition to Table 3. Updated Section 6. 18-Dec-2013 20/

m. mm Tape size 24.0 0.30 A max. 330.0 B min. 1.5 C 13.0 0.20 D min. 20.2 N min. 60 G 24.4 +2/-0 T max. 30.4 DocID11456 Rev 9 VN808CM-E 8 Ordering information Ordering information Table 15. Order code Order code Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and reel DocID11456 Rev 9 19/21 Revision history 9 VN808CM-E Revision history Table 16. Document revision history 20/21 Date Revision Changes 29-Jun-2005 1 Initial release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 09-Jul-2008 4 Added Section 6: Reverse polarity protection 04-Aug-2008 5 Added Figure 9: PowerSO-36 drawings 26-Aug-2009 6 Updated Section 6: Reverse polarity protection 15-Sep-2009 7 Typing mistake in cover page: Section : Features and Table 5: Input pin 24-Feb-2010 8 Updated Section 7: Package mechanical data 01-Aug-2013 9 Updated Section 7.1: Footprint recommended data. DocID11456 Rev 9 VN808CM-E Please Read Carefully: Information in this document is provided solely in connect

ld flash or protusions shall non exceed 0.15mm (0.006 inch) - Critical dimensions are "a3", "E" and "G". Figure 8. PowerSO-36 scheme 13/16 VN808CM-E Order code 7 Table 11. 14/16 Order code Order code Part number Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and Reel VN808CM-E 8 Revision history Revision history Table 12. Revision history Date Revision Changes 29-Jun-2005 1 Final release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 15/16 VN808CM-E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described

L 1.10 0.80 N S 14/18 Max. 1.10 0.0433 0.031 10 0 8 0.0433 10 0 8 VN808CM-E Package mechanical data Figure 9. PowerSO-36 drawings 15/18 Order codes 9 VN808CM-E Order codes Table 11. 16/18 Order codes Order codes Package Packaging VN808CM-E PowerSO-36 Tube VN808CMTR-E PowerSO-36 Tape and reel VN808CM-E 10 Revision history Revision history Table 12. Document revision history Date Revision Changes 29-Jun-2005 1 Final release 12-Sep-2005 2 New template 28-Jun-2006 3 Application schematic updated 09-Jul-2008 4 Added Section 7 on page 13 17/18 VN808CM-E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection