STM32F429NIH6 microcontrollers. It features three I2C, six SPIs with two muxed full-duplex I2S, SDIO, four USART, four UART, two CAN, three 12-bit ADC, two 12-bit DAC, one SAI, 8- to 14-bit digital camera module interface, internal 256+4 KB SRAM and 2 MB Flash, USB HS OTG and USB FS OTG, Ethernet MAC, FMC interface, JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as a final application. The full range of hardware features on the board helps you evaluate all peripherals (USB OTG HS, USB OTG FS, Ethernet, Motor Control, CAN, MicroSD Card, USART, Audio DAC and ADC, digital microphone, IrDA, CAN, RF EEPROM, SRAM, Nor Flash, SDRAM, 4.3" TFT LCD with a resistive touch panel etc.) and develop your own applications. Extension headers make it possible to easily connect a daughterboard for your specific application. The integrated ST-LINK/V2 provides an embedded in-circuit debugger and programmer for the STM32 MCU. Fi

STM32F429NIH6 microcontroller * 4.3" color TFT LCD with resistive touchscreen (480 x 272 pixels) * Six 5 V power supply options: - Power jack - ST-LINK/V2 USB connector - User USB HS connector - User USB FS1 connector - User USB FS2 connector - Daughterboard * SAI Audio DAC, stereo audio jack which supports headset with microphone * Stereo digital microphone, audio terminal connector used to connect external speakers * 2 GBytes (or more) SDIO interface MicroSD card * RF EEPROM on I2C compatible serial interface * RS-232 communication Description * IrDA transceiver * JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded * IEEE-802.3-2002 compliant Ethernet connector * Camera module * 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash * Joystick with 4-directional control and selector * Reset, Wakeup and Tamper buttons * 4 color user LEDs * Extension connectors & memory connectors for daughterboard or wrapping board * USB OTG HS and FS with Micro-AB connectors * * * * The STM32429I-E

STM32F429NIH6 microcontroller * 4.3" color TFT LCD with resistive touchscreen (480 x 272 pixels) * Six 5 V power supply options: - Power jack - ST-LINK/V2 USB connector - User USB HS connector - User USB FS1 connector - User USB FS2 connector - Daughterboard * SAI Audio DAC, stereo audio jack which supports headset with microphone * Stereo digital microphone, audio terminal connector used to connect external speakers * 2 GBytes (or more) SDIO interface MicroSD card * RF EEPROM on I2C compatible serial interface * RS-232 communication Description * IrDA transceiver * JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded * IEEE-802.3-2002 compliant Ethernet connector * Camera module * 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash * Joystick with 4-directional control and selector * Reset, Wakeup and Tamper buttons * 4 color user LEDs * Extension connectors & memory connectors for daughterboard or wrapping board * USB OTG HS and FS with Micro-AB connectors * * * * The STM32429I-E

supplied in any prior versions of this document. (c) 2016 STMicroelectronics - All rights reserved 238/238 DocID024030 Rev 9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STM32F429NIH6U STM32F429IET6 STM32F429ZET6 STM32F429ZGY6TR