package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAC7366 REV NO: V.8 DATE: MAY/12/2010 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1102000624 Selection Guide Part No. Dice L-1503CB/1SRD Lens Type Super Bright Red (GaAlAs) RED DIFFUSED Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 380 700 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR =

to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA5017 REV NO: V.11B DATE: APR/13/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1202000624 Selection Guide Part No. KM2520SF4C03 Dice Lens Type SF4 (GaAlAs) Po (mW/sr) [2] @ 20mA *50mA Min. Typ. 2 4 *3 *8 Water Clear Viewing Angle [1] 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. 3. Radiant intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2

package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA5017 REV NO: V.8 DATE: APR/26/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI PAGE: 1 OF 5 ERP: 1202000624 Selection Guide Part No. KM2520SF4C03 Dice Lens Type SF4 (GaAIAs) Po (mW/sr) [2] @ 20mA *50mA Min. Typ. 1.6 4 *2.6 *8 WATER CLEAR Viewing Angle [1] 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C

he package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2063 REV NO: V.3 DATE: APR/07/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1102000624 Selection Guide Part No. Dice WP1503CB/SRD Iv (mcd) [2] @ 20mA Lens Type Super Bright Red (GaAlAs) Viewing Angle [1] Min. Typ. 21/2 500 1000 60 Red Diffused Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR =

package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAC7366 REV NO: V.9 DATE: DEC/24/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han PAGE: 1 OF 5 ERP: 1102000624 Selection Guide Part No. Dice L-1503CB/1SRD Iv (mcd) [2] @ 20mA Lens Type Super Bright Red (GaAlAs) Red Diffused Viewing Angle [1] Min. Typ. 21/2 500 1000 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR

ckage. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2063 REV NO: V.4A DATE: MAR/16/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102000624 Selection Guide Part No. Dice WP1503CB/SRD Iv (mcd) [2] @ 20mA Lens Type Super Bright Red (GaAlAs) Viewing Angle [1] Min. Typ. 500 1000 *120 *260 Red Diffused 21/2 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 655 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2]

ical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAF2063 / 1102000624 Rev No: V.7A Date: 06/17/2017 Page 1 / 4 WP1503CB/SRD ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25C Parameter Symbol Emitting Color peak Value Unit Typ. Max. Super Bright Red 655 - nm dom [1] Super Bright Red 640 - nm Spectral Bandwidth at 50% REL MAX IF = 20mA Super Bright Red 20 - nm Capacitance C Super Bright Red 45 - pF Forward Voltage IF = 20mA VF [2] Super Bright Red 1.85 2.5 V Reverse Current (VR = 5V) IR Super Bright Red - 10 uA Wavelength at Peak Emission IF = 20mA Dominant Wavelength IF = 20mA Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operati

erwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAB2263 REV NO: V.4 DATE: JAN/27/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.. YU EPR: 1202000624 Selection Guide Part No. AM2520SF4C03 Dice Po (mW/sr) @ 20mA *50mA Lens Type SF4 (GaAlAs) Min. Typ. 1.6 4 *2.6 *8 Viewing Angle 2 1/2 20 WATER CLEAR Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR - 10 uA VR=5V Capacitance SF4 C 90 - pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 - nm IF=20mA Spectral Bandwidth SF4 1/2 50 - nm IF=20mA Absolute Maximum Ratings at TA=25C Parameter Symbol SF4 Units Power Dissipation PT 100 mW DC Forward Current IF 50

subject to change without notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1202000624 Selection Guide Part No. KM2520SF4C03 Dice Lens Type SF4 (GaAIAs) Po (mW/sr) [2] @ 20mA *50mA Min. Typ. 1.6 4 *2.6 *8 WATER CLEAR Viewing Angle [1] 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=2

package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA9681 REV NO: V.13B DATE: APR/01/2013 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1202000628 Selection Guide Part No. Dice KM2520SGC01 Iv (mcd) [2] @ 20mA Lens Type Super Bright Green (GaP) Viewing Angle [1] Min. Typ. 21/2 40 90 20 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forwar

erwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2063 REV NO: V.2 DATE: MAY/22/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1102000624 Selection Guide Part No. Dice WP1503CB/SRD Iv (mcd) [2] @ 20mA Lens Type Super Bright Red (GaAlAs) Viewing Angle [1] Min. Typ. 21/2 380 700 60 RED DIFFUSED Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR

package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB2263 REV NO: V.6 DATE: JUN/20/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1202000624 Selection Guide Part No. AM2520SF4C03 Dice Lens Type SF4 (GaAIAs) Po (mW/sr) [2] @ 20mA *50mA Min. Typ. 3 5 *4 *9 Water Clear Viewing Angle [1] 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Para

t to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAB2263 REV NO: V.7B DATE: JUN/25/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1202000624 Selection Guide Part No. AM2520SF4C03 Dice Lens Type SF4 (GaAlAs) Po (mW/sr) [2] @ 20mA *50mA Min. Typ. 2 4 *3 *8 Water Clear Viewing Angle [1] 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. 3. Radiant intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2

subject to change without notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1202000624 Selection Guide Part No. KM2520SF4C03 Dice Lens Type SF4 (GaAIAs) Po (mW/sr) [2] @ 20mA *50mA Min. Typ. 1.6 4 *2.6 *8 WATER CLEAR Viewing Angle [1] 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=2

0200062 Switching jumper - SB 2- 8/13 N - 0200062 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Switching jumper, pitch: 13 mm, number of positions: 2, color: silver Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918124700 Weight per Piece (excluding packing) 14.100 g Custom tariff number 85389099 Country of origin Poland Technical data Technical data Color silver Material Copper Number of positions 2 Pitch 13 mm Standards and Regulations Test standard 2 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally friendly use period: unlimited = EFUP-e 02/24/2019 Page 1 / 3 https://www.phoenixcontact.com/us/products/0200062 Switching jumper - SB 2- 8/13 N - 0200062 Technical data Environmental Product Compliance No hazardous substance