rwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB5115 REV NO: V.10 DATE: MAR/23/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1302000173 Selection Guide Part No. Dice DA08-11YWA Lens Type Yellow (GaAsP/GaP) White Diffused Iv (ucd) [1] @ 10mA Min. Typ. 3600 7700 Description Common Anode ,Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 75 mW DC Forward Curr

ensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB5115 REV NO: V.9 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1302000173 Selection Guide Part No. Dice DA08-11YWA Yellow (GaAsP/GaP) Iv (ucd) [1] @ 10mA Lens Type WHITE DIFFUSED Min. Typ. 1200 4700 Description Common Anode ,Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 75 mW DC Forward Curr

ensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB5115 REV NO: V.8 DATE: NOV/02/2006 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1302000173 Selection Guide Dice Part No. DA08-11YWA Iv (ucd) [1] @ 10mA Lens Type YELLOW (GaAsP/GaP) WHITE DIFFUSED Description Min. Typ. 1200 4700 Common Anode ,Rt. Hand Decimal. Note: 1.Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 105 mW DC Forward Cur

ensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA6352 REV NO: V.5 DATE: APR/27/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: B.H.LI ERP: 1302000171 Selection Guide Part No. Dice DA08-11SRWA Iv (ucd) @ 10mA Lens Type SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED Min. Typ. 4700 24000 Description Common Anode ,Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Super Bright Red D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155

18002000200 18002000201 18002000202 18002000203 18002000163 18002000856 18002000865 18002000872 18002000031 18002000207 18002000168 18002000287 18002000130 18002000326 18002000199 18002000086 18002000358 18002000029 18002000212 18002000213 18002000318 18002000178 18002000148 18002000356 Commercial Reference 18002000877 BDM4532S0173 18002000033 18002000218 18002000068 18002000327 BDM7 series 18002000269 18002000389 18002000187 18002000183 18002000012 18002000009 18002000007 18002000341 18002000497 18002000011 18002000330 18002000331 18002000073 18002000252 18002000342 18002000017 18002000353 18002000268 18002000290 18002000291 18002000074 18002000294 BDM4542HTA00 BDM4542HTAM1 BDM4544HTA00 BDM4564S0115 UK1000000145 BDM4332HTA00 BDM4332HTAM1 BDM4332HTAM2 BDM4332HTAM3 BDM4332HTAM4 BDM4332S0086 BDM4332S0150 BDM4332S0160 BDM4332S0168 BDM4342HTA00 BDM4342HTAM2 BDM4342S0008 BDM4342S0053 BDM4342S0094 BDM4342S0101 BDM4342S0136 BDM4344HTA00 BDM4364S0139 BDM4532HTA00 BDM4532HTAM1 BDM4532HTAM2 BDM4532S0036 B

rwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA6352 REV NO: V.10 DATE: MAR/23/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1302000171 Selection Guide Part No. Dice DA08-11SRWA Lens Type Super Bright Red (GaAlAs) White Diffused Iv (ucd) [1] @ 10mA Min. Typ. 14000 32000 Description Common Anode ,Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings a

rwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB5115 REV NO: V.10 DATE: MAR/23/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1302000173 Selection Guide Part No. Dice DA08-11YWA Lens Type Yellow (GaAsP/GaP) White Diffused Iv (ucd) [1] @ 10mA Min. Typ. 3600 7700 Description Common Anode ,Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 75 mW DC Forward Curr

rwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA6352 REV NO: V.10 DATE: MAR/23/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1302000171 Selection Guide Part No. Dice DA08-11SRWA Lens Type Super Bright Red (GaAlAs) White Diffused Iv (ucd) [1] @ 10mA Min. Typ. 14000 32000 Description Common Anode ,Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings a

imensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA6352 REV NO: V.6 DATE: NOV/21/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: F.LI ERP: 1302000171 Selection Guide Part No. Dice DA08-11SRWA Iv (ucd) @ 10mA Lens Type SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED Description Min. Typ. 4700 24000 Common Anode ,Rt. Hand Decimal. Units Test Conditions Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. peak Peak Wavelength Super Bright Red 660 nm IF=20mA D Dominant Wavelength Super Bright Red 640 nm IF=20mA 1/2 Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155

ensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA6352 REV NO: V.9 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1302000171 Selection Guide Part No. Dice DA08-11SRWA Iv (ucd) [1] @ 10mA Lens Type Super Bright Red (GaAlAs) WHITE DIFFUSED Min. Typ. 8000 29000 Description Common Anode ,Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at

ensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA6352 REV NO: V.8 DATE: NOV/02/2006 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1302000171 Selection Guide Dice Part No. DA08-11SRWA Iv (ucd) [1] @ 10mA Lens Type SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED Min. Typ. 4700 24000 Description Common Anode ,Rt. Hand Decimal. Note: 1.Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at

1SV286 (TPH3) MA2S077-(TX) 1SV308 (TPL3) MA2S111-(TX) MA2S111-(TX) MA2S111-(TX) MA2S077-(TX) MA2S077-(TX) MA2S077-(TX) MA2S077-(TX) 1SV308 (TPL3) 1SV308 (TPL3) MA2S077-(TX) MA133 (TX) MA132WK (TX) FI2 FI3 FI4 FI901 FI902 FI904 FI905 2020001270 2010002490 2020001760 2040001570 2020001700 2040001590 2020001710 CERAMIC S.XTAL S.CERAMIC SAW S.CERAMIC S.LC S.CERAMIC CFWM450E FL-319 SFECV13.25MAS WFSTSB6221D SFSCC4.5MC2-TC10 LFSC25N11B0240B TPSCC4.5MB-TC10 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L21 L39 L41 L46 L47 L48 L49 L50 L51 L52 L53 L54 6200005600 6200005730 6200005670 6200005690 6200005690 6200009270 6200009270 6200005690 6200005700 6200005740 6200005680 6200005660 6200005610 6200005610 6200005630 6150004840 6200005690 6200005720 6200005640 6200005670 6200005680 6200005740 6200005680 6200005650 6200005680 6200005670 6200005660 S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S.COIL S

imensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB5115 REV NO: V.6 DATE: NOV/21/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: F.LI ERP: 1302000173 Selection Guide Part No. Dice DA08-11YWA Iv (ucd) @ 10mA Lens Type YELLOW (GaAsP/GaP) WHITE DIFFUSED Description Min. Typ. 1200 4700 Common Anode ,Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Yellow D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Lead Solder

ensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB5115 REV NO: V.5 DATE: APR/27/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: B.H.LI ERP: 1302000173 Selection Guide Part No. Dice DA08-11YWA Iv (ucd) @ 10mA Lens Type YELLOW (GaAsP/GaP) WHITE DIFFUSED Description Min. Typ. 1200 4700 Common Anode ,Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Yellow D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Lead Solder

DM#" [CR] Command answer: none Command action: changes the output data format on the communication link. Parameter range: #= 0 or 1. Description: this command changes the output data format on the communication link. DM1= ISO24631-6 format: [STX]1000071981020001790016080829140603[CR][LF] DM0= Datamars format: [CR][LF] " 981020001790016 290808 140603" [CR][LF] ID CODE DATE HOUR 10.1.17 Clears the message area * * * * Command syntax: Command answer: Command action: Parameter range: ".m0" [CR] [LF] clears the message area none. Description: this command clears the message area of the display. 10.1.18 Write a message to the display * * * * Command syntax: Command answer: Command action: Parameter range: ".m#" [**max 15 char**][CR] [LF] writes a message to the display at the row # #= 1 to 3. Description: this command writes a message to the display at the row #. The message string has to be max 15 characters. The message can be written on the row 1, 2 or 3 of the display. ISO MAX V Manual