LS1012A Board Reference Manual, Rev. 3, 12/2016 NXP Semiconductors 17 Double data rate (DDR) memory 2.5 Double data rate (DDR) memory The FRDM-LS1012A supports One 512 MB DDR3L SDRAM memory, running at data rates up to 1000 MT/s. The part number is Micron MT41K256M16TW-107:P. Following are the characteristics of the LS1012A DDR3L memory controller: * * * * Up to 1.0 GT/s Supports 16-bit operation (no ECC support) Support for x8, x16 devices Supports 1 chip select, D1_MCS_B The VR5100 VREF LDO (U8) takes 1.35 V supply and provides 0.675 V VREF supply to the DDR3L memory. The memory interface includes all the necessary termination and I/O power, and is routed so as to achieve maximum performance of the memory bus. 2.6 Serializer/deserializer (SerDes) The FRDM-LS1012A SerDes block provides two high-speed serial communication lane, supporting SGMII PHYs. See QorIQ LS1012A Data Sheet for details about the SerDes protocols supported on the LS1012A processor. The following table lists the components use
HA-125 XIT:E MT41K256M16HA-125:E MT41K256M16LY-093:N MT41K256M16LY-107:N MT41K256M16TW-093 IT:P MT41K256M16TW-093:P MT41K256M16TW-093G:P MT41K256M16TW-107 AAT:P MT41K256M16TW-107 AIT:P MT41K256M16TW-107 AUT:P MT41K256M16TW-107 IT:P MT41K256M16TW-107 XIT:P MT41K256M16TW-107:P MT41K256M4DA-107:J MT41K256M8DA-107 IT:K MT41K256M8DA-107:K MT41K256M8DA-125 AAT:K MT41K256M8DA-125 AIT:K MT41K256M8DA-125 IT:K MT41K256M8DA-125:K MT41K2G4RKB-107:N MT41K2G4SN-107:A MT41K2G4SN-125:A MT41K2G4TRF-107:E MT41K2G4TRF-125:E MT41K512M16HA-107 AIT:A MT41K512M16HA-107 IT:A MT41K512M16HA-107:A MT41K512M16HA-107G:A MT41K512M16HA-125 AIT:A MT41K512M16HA-125 IT:A MT41K512M16HA-125:A MT41K512M16TNA-107:E PDF: 09005aef81247d00/Source: 09005aef812478ea CSN04.fm - Rev. AO 7/16 EN 10 Tray Qty2 Box Qty2 Tape-andReel Quantity2, 3 170 170 200 200 170 170 170 170 170 170 170 170 170 180 180 228 228 228 228 228 228 228 228 228 240 240 240 240 240 240 240 240 170 170 200 200 170 170 170 170 170 170 170 190 1000 1000 1000 1000 1000 1