170 (4.32) 0.170 (4.32) PART NUMBER WIRE SIZE AWG/(mm2) A BO CO PART NUMBER WIRE SIZE AWG/(mm2) A BO CO FC7520D 20 / 22 / 24 (0.5/0.3/0.25) 0.612 (15.54) 0.045 (1.14) 0.066 (1.68) MC7520D 20 / 22 / 24 (0.5/0.3/0.25) 0.618 (15.70) 0.045 (1.14) 0.066 (1.68) FC7526D 26 / 28 / 30 (0.12/0.08/0.05) 0.612 (15.54) 0.026 (0.66) 0.066 (1.68) MC7526D 26 / 28 / 30 (0.12/0.08/0.05) 0.618 (15.70) 0.026 (0.66) 0.066 (1.68) Crimp contacts must be ordered separately. 0.086 O (2.18) FEMALE CONTACT MALE CONTACT 18 AWG (1.0 mm2) max. 18 AWG (1.0 mm2) max. 0.927 (23.55) 0.915 (23.25) 0.170 (4.32) 0.055 O (1.40) 0.086 O (2.18) 0.040 O (1.02) 0.055 O (1.40) 0.170 (4.32) FC7518D MC7518D Material - Phosphor bronze. Material - Brass. Plating - Gold flash over nickel. Plating - Gold flash over nickel. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same
70 (4.32) 0.170 (4.32) PART NUMBER WIRE SIZE AWG/(mm2) A BO CO PART NUMBER WIRE SIZE AWG/(mm2 ) A BO CO FC7520D 20 / 22 / 24 (0.5/0.3/0.25) 0.612 (15.54) 0.045 (1.14) 0.066 (1.68) MC7520D 20 / 22 / 24 (0.5/0.3/0.25) 0.618 (15.70) 0.045 (1.14) 0.066 (1.68) FC7526D 26 / 28 / 30 (0.12/0.08/0.05) 0.612 (15.54) 0.026 (0.66) 0.066 (1.68) MC7526D 26 / 28 / 30 (0.12/0.08/0.05) 0.618 (15.70) 0.026 (0.66) 0.066 (1.68) Crimp contacts must be ordered separately. 0.086 O (2.18) FEMALE CONTACT MALE CONTACT 18 AWG (1.0 mm 2) max. 18 AWG (1.0 mm 2) max. 0.927 (23.55) 0.915 (23.25) 0.170 (4.32) 0.040 O (1.02) 0.055 O (1.40) 0.170 (4.32) 0.055 O (1.40) 0.086 O (2.18) FC7518D MC7518D Material - Phosphor bronze. Material - Brass. Plating - Gold flash over nickel. Plating - Gold flash over nickel. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The sa
[1.02] 0.170 [4.32] oB 0.170 [4.32] WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] SD SERIES PART NUMBER Note: *C75**D contacts can not be used in the RD series. Crimp contacts must be ordered separately. Additional plating options available by adding suffix to part number add -14 for 0.000030 [0.76 microns] gold over nickel Example: FC7520D-14 or MC7518D-14 MALE CONTACT 18 AWG [1.0 mm2] max. FEMALE CONTACT 18 AWG [1.0 mm2] max. 0.915 [23.25] O0.086 [2.18] O0.055 [1.40] 0.927 [23.55] O0.040 [1.02] 0.170 [4.32] FC7518D Material - Phosphor bronze. Plating - Gold flash over nickel. 0.170 [4.32] MC7518D Material - Brass. Plating - Gold flash over nickel. REELS FOR AUTOMATIC PNE
[1.02] 0.170 [4.32] oB 0.170 [4.32] WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] SD SERIES PART NUMBER Note: *C75**D contacts can not be used in the RD series. Crimp contacts must be ordered separately. Additional plating options available by adding suffix to part number add -14 for 0.000030 [0.76 microns] gold over nickel Example: FC7520D-14 or MC7518D-14 MALE CONTACT 18 AWG [1.0 mm2] max. FEMALE CONTACT 18 AWG [1.0 mm2] max. 0.915 [23.25] O0.086 [2.18] O0.055 [1.40] 0.927 [23.55] O0.040 [1.02] 0.170 [4.32] FC7518D Material - Phosphor bronze. Plating - Gold flash over nickel. 0.170 [4.32] MC7518D Material - Brass. Plating - Gold flash over nickel. REELS FOR AUTOMATIC PNE
[4.32] 0.170 [4.32] oB PART NUMBER WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] Note: *C75**D contacts can not be used in the RD series. PLating: STANDARD FINISH: Gold flash over nickel plate. optional FINISHES: 0 .000030 [0.76 ] gold over nickel by adding "-14" s uffix onto part number. Example: FC7520D-14 0.000050 inch [1.27] gold over nickel by adding "-15" s uffix onto part number. Example: MC7526D-15 The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded c onnector. REMOVABLE CRIMP CONTACTS N
[1.02] 0.170 [4.32] oB 0.170 [4.32] WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] SD SERIES PART NUMBER Note: *C75**D contacts can not be used in the RD series. Crimp contacts must be ordered separately. Additional plating options available by adding suffix to part number add -14 for 0.000030 [0.76 microns] gold over nickel Example: FC7520D-14 or MC7518D-14 MALE CONTACT 18 AWG [1.0 mm2] max. FEMALE CONTACT 18 AWG [1.0 mm2] max. 0.915 [23.25] O0.086 [2.18] O0.055 [1.40] 0.927 [23.55] O0.040 [1.02] 0.170 [4.32] FC7518D Material - Phosphor bronze. Plating - Gold flash over nickel. 0.170 [4.32] MC7518D Material - Brass. Plating - Gold flash over nickel. REELS FOR AUTOMATIC FEE
[4.32] 0.170 [4.32] oB PART NUMBER WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] Note: *C75**D contacts can not be used in the RD series. PLATING: STANDARD FINISH: Gold flash over nickel plate. OPTIONAL FINISHES: 0 .000030 [0.76 ] gold over nickel by adding "-14" s uffix onto part number. Example: FC7520D-14 0.000050 inch [1.27] gold over nickel by adding "-15" s uffix onto part number. Example: MC7526D-15 The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from m olding after insertion. Not suitable for fully loaded c onnector. REMOVABLE CRIMP CONTACTS
[4.32] oB 0.170 [4.32] PART NUMBER WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] Note: *C75**D contacts can not be used in the RD series. MATERIAL: MALE CONTACTS: Brass. FEMALE CONTACTS: Phosphor bronze. PLATING: STANDARD FINISH: Gold flash over nickel plate. OPTIONAL FINISHES: 0.000030 [0.76 ] gold over nickel by adding "-14" suffix onto part number. Example: FC7520D-14 0.000050 inch [1.27] gold over nickel by adding "-15" suffix onto part number. Example: MC7526D-15 For crimping information and crimp tools, see Application Tools section, pages 69-72. REMOVABLE CRIMP CONTACTS 18 AWG CRIMP CONTACTS 18 AWG [1.0mm2] CONTACTS MUST BE ORDERED SEPARATELY. MALE CONTACT SD SERIE
0 | (4,32) (4,32) WIRE SIZE WIRE SIZE PART NO. | WIRE SIZE A Bg | ce PART NO. | AWav(mm?) A BS |} cs 20/22/24 0.612 0.045 0.066 20/22/24 0.618 0.045 | 0.066 FE7S200 |65/0,3/0,25)| (16,84)| (1,14) | (1,68) MC7520D | (6,570,3/0,25)| (15,70)| (1.14) | (1,68) FC7526D 26/28/30 | 0.612 | 0.026 | 0.066 Mc7526D 26/28/30 | 0.618 | 0.026 | 0.066 (0,12/0,08/0,05) ](15,54)1 (0,66) | (1,68) (0,12/0,08/0,05) |(15,70)| (0,66) ] (1,68) FEMALE CONTACT MALE CONTACT 18 AWG (1,0 mm?) MAX. 18 AWG (1,0 mm?) MAX. 0.055 @ (1,40) 0.883 _ 0.927 (22,43) (23,55) 0.0558 (1,40) 4 coe 1 < = | Oo | ' L, 0.086 & 0.170, | 0.040 @ I.0.170 , (2,18) (4,32) (1,02) 4,32) (0.18) FC7518D MC7518D Material - Phosphor bronze. Material - . Plating - Gold flash over nickel. ateria Brass Plating - Gold flash over nickel. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same
[4.32] 0.170 [4.32] oB PART NUMBER WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] Note: *C75**D contacts can not be used in the RD series. PLating: STANDARD FINISH: Gold flash over nickel plate. optional FINISHES: 0 .000030 [0.76 ] gold over nickel by adding "-14" s uffix onto part number. Example: FC7520D-14 0.000050 inch [1.27] gold over nickel by adding "-15" s uffix onto part number. Example: MC7526D-15 The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded c onnector. REMOVABLE CRIMP CONTACTS N
[4.32] oB 0.170 [4.32] PART NUMBER WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] Note: *C75**D contacts can not be used in the RD series. PLATING: STANDARD FINISH: Gold flash over nickel plate. OPTIONAL FINISHES: 0.000030 [0.76 ] gold over nickel by adding "-14" suffix onto part number. Example: FC7520D-14 0.000050 inch [1.27] gold over nickel by adding "-15" suffix onto part number. Example: MC7526D-15 The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Wire cannot be removed from molding after insertion. Not suitable for fully loaded connector. REMOVABLE CRIMP CONTACTS Note:
[4.32] oB 0.170 [4.32] PART NUMBER WIRE SIZE AWG/[mm2] A OB OC PART NUMBER WIRE SIZE AWG/[mm2] A OB OC FC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.612 [15.54] 0.045 [1.14] 0.066 [1.68] MC7520D 20 / 22 / 24 [0.5/0.3/0.25] 0.618 [15.70] 0.045 [1.14] 0.066 [1.68] FC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.612 [15.54] 0.026 [0.66] 0.066 [1.68] MC7526D 26 / 28 / 30 [0.12/0.08/0.05] 0.618 [15.70] 0.026 [0.66] 0.066 [1.68] Note: *C75**D contacts can not be used in the RD series. PLATING: STANDARD FINISH: Gold flash over nickel plate. OPTIONAL FINISHES: 0.000030 [0.76 ] gold over nickel by adding "-14" suffix onto part number. Example: FC7520D-14 0.000050 inch [1.27] gold over nickel by adding "-15" suffix onto part number. Example: MC7526D-15 The crimp area of this contact is not protected when fully seated in the connector molding. These contacts require shrink tubing after installation. Not suitable for fully loaded connector. Note: Connectors can be kitted with all applicable crimp contacts, contact Technica